Please type a search term (at least two characters)
Combustion pyrometer successfully measures sub-millisecond temperature transients
EMPIR project Development of measurement and calibration techniques for dynamic pressures and temperatures (17IND07, DynPT) is developing traceable calibration methods for dynamic pressure and temperature sensors for use in industrial settings where the pressure and temperature change such as product testing and process control. For example, in the research and development of engines precise knowledge about in-cylinder pressure and temperature is important understanding the combustion process, which in turn enables optimisation of engine power and fuel consumption.
The project will also develop computer simulations to model sensor behaviour when exposed to a range of changing conditions and various media, with new sensor types also to be assessed for suitability of use. With best practice guidelines and workshops delivered by the project, results will also support international standards adopted by industry.
As part of the project NPL has developed a novel ultra-fast fibre-optic based dynamic thermometer, known as a combustion pyrometer. This instrument, designed and built in-house, has been traceably calibrated in a wide temperature range, from 800 °C to 2600 °C, and tested for speed (up to 250 kHz) using the pyrotechnic facility at NPL and cross-validated at RISE in Sweden. The instrument successfully measured and recorded very fast temperature transients, at sub-millisecond timescales in explosions of pyrotechnic charges.
The project research was presented and well received at the EVI-GTI 2019 International Gas Turbine Instrumentation Conference in Austria in November 2019, where interest in future collaboration for a potential EMPIR follow-up project was shown by a number of industrial stakeholders.
Sari Saxholm from VTT MIKES said
‘The project results will significantly improve the quality of measurements and thus support the innovation potential and competitiveness of European industry. The main strengths of this project are the skills, experience and expertise of our consortium. The combined resources of the consortium provide a best-in-the-world knowledge base and facilities covering the wide range of dynamic pressure and temperature calibrations and measurements.’
This EMPIR project is co-funded by the European Union's Horizon 2020 research and innovation programme and the EMPIR Participating States.
Want to hear more about EURAMET?
23 June 2022, 09:30 – 16:30 CEST, METAS (the National Metrology Institute of Switzerland) more
Abstract deadline extended to 30 June 2022 for Metrology for Climate Action Workshop more
Procedures allowing medical implant manufacturers to demonstrate compliance with MRI safety regulations more
Liquid energy gases provide cleaner alternatives to traditional fuels - now Europe has a new calibration facility for these energy sources more
EMPIR project develops new NanoXSpot (NxS) gauge with line groups, Siemens star, and hole patterns for focal spot size measurement down to 100 nm more