News

EMPIR project develops best practice guidance for on-wafer microwave measurement

Circuit board

Guidance freely available

Recently completed EMPIR project ‘Microwave measurements for planar circuits and components’ (14IND02, PlanarCal) aimed to enable the traceable measurement and electrical characterisation of integrated circuits and components used in systems such as mobile communications and radar sensors in driverless cars.

Achievements from the project include:

  • The partners developed a Best Practice Guide entitled Best Practice Guide for Planar S-Parameter Measurements using Vector Network Analysers , which presents useful best practice recommendations together with key takeaways developed from the research performed in PlanarCal. The information contained in the guide will be useful for the industrial, scientific, metrological, and circuit-design user community.
  • As a world-wide first, PTB together with R&S and FVB demonstrated traceability to dimensional measurements for on-wafer S-parameter measurements on an industrial substrate (fused silica).
  • PTB demonstrated that commercial impedance substrates can be used for transferring the low uncertainties from reference calibrations to industrial applications
  • As a world-wide first, FhG together with PTB and NPL compared split-block waveguide measurements to conventional on-wafer measurements in D-band (for frequencies in the range from 110 to 170 GHz).

This EMPIR project is co-funded by the European Union's Horizon 2020 research and innovation programme and the EMPIR Participating States.


Want to hear more about EURAMET?
Sign up for EURAMET newsletters and other information

 

Select your area of interest
Partnership Call 2022: Stage 2 OPEN
2022-06-23

The deadline for submission of joint research project proposals is 23:59 CEST on 03 October 2022. more

Don’t miss EMN TraceLabMed’s workshop on the future of nucleic acid metrology!
2022-06-10

23 June 2022, 09:30 – 16:30 CEST, METAS (the National Metrology Institute of Switzerland) more

EMPIR project improves patient safety for MRI scans with implants
2022-06-08

Procedures allowing medical implant manufacturers to demonstrate compliance with MRI safety regulations more

EURAMET projects enable Europe’s first calibration facility for LNG
2022-06-03

Liquid energy gases provide cleaner alternatives to traditional fuels - now Europe has a new calibration facility for these energy sources more

Page 1 of 191.