CIM 2017: Demonstrations of small angle generators

Calibration of an autocollimator by Large Range Small Angle Generator (LRSAG) of TUBITAK. Estimated expanded uncertainty U = 0.01"

Two novel large-range small-angle generators developed in EMRP project will be demonstrated on the EURAMET stand at International Metrology Congress

Improved angle measuring devices are needed for many applications; from the precision form measurement of optical surfaces used at synchrotron radiation beamlines, to the nanoradian angle measurements in high level science; in space applications such as calibration of accelerometers for space missions, monitoring the angles of telescope mirrors in astrometry (Star Tracking), determination of the Newtonian constant of gravitation G, and nanonewton force measurements.

EMRP project Angle metrology (SIB58 Angles) developed prototype devices to realise the radian, the SI unit of angle, and ensure reliable angle measurement.

Three novel, large-range small-angle generators were developed by project partners TUBITAK, TEKNIKER & CEM and CMI for calibration of autocollimators, which are used to measure angles. Two of these novel angle generators will be demonstrated on the EURAMET stand at CIM 2017.

These instruments and other innovative devices will be demonstrated on the EURAMET stand at the 18th International Metrology Congress (CIM 2017) on the 19-21 September 2017.
The full congress programme and registration details can be found on the congress website.

Visit EURAMET at CIM 2017 to see this and other innovative devices.

Select your area of interest
Journal paper describing work of EMRP project is favourite from last 15 years

Paper in journal Nature Physics is featured as one of the editors’ favourites from the journal’s 15- year lifetime more

New faster methods for measuring energy absorption from mobile phones

EMPIR project has improved measurements for the rate at which energy is absorbed by the human body when using smartphones more

Machine learning and data analysis video tutorials available from EMPIR project

Project on factory of the future is building calibration capabilities for advanced, digital-only industrial sensors more

Figure: a) A calculated back focal plane image with θ=70°, ϕ=345° and z0 = 60nm. b) A measured back focal plane image of an NV-center. From J. Christinck et al., Appl. Phys. B 126, 161 (2020). Copyright PTB, published with kind permission of PTB
EMPIR project contributes to European Metrology Network for Quantum Technologies

Improving sources of single photons to accelerate quantum technology innovation more

EMPIR project gives first access to algorithms used for MR-based EPT

Assessing new MRI technologies using quantitative methods for more accurate clinical diagnoses more

Page 1 of 170.