The gateway to Europe's
integrated metrology community.
Euramet Projects See all
On-site visits by peers at JRC-Geel in the fields of chemistry and ionising radiation
Starting Date
2021-10-01

Project Description

The JRC-Geel is planning to re-instate several selected CMCs. In preparation of the initial presentation of JRC-Geel in EURAMET TC Quality an on-site visit by peers has been agreed with experts from SMD (Belgium), LNE-LNHB (France) and PTB (Germany), which will peer review the QMS and selected CMCs in the metrological fields of chemistry and ionising r...

Reg. No.
1535
Collaboration Type
Consultation
Status
in progress
Coordinating Institute
SMD
Coordinator
Dobre, Miruna
Learn more
Supplementary Comparison EURAMET.L-S26.1: Measurement of groove depth standards in the range 1 µm up to 1 mm. Follow-up of EURAMET.L-S26
Starting Date
2021-06-18

The depth of six v-shaped grooves with nominal values 5/20/50/200/600 and 900 µm have to be measured. The depth has to be measured according to ISO 5436-1. The PTB nickel depth setting standard is used as reference standard. PTB measures all depths, MIKES 3 smaller depths and UME 3 larger depths.

This Supplementary Comparison is a follow-up of the EURAMET project 1407: Me...

Reg. No.
1534
Collaboration Type
Comparison
Status
in progress
Coordinating Institute
MIKES
Coordinator
Lassila, Antti
Learn more
Comparison of piston-operated volumetric instruments
Starting Date
2021-09-01

Project Description

Three different piston-operated volumetric instruments (micropipette, glass syringe and piston burette) shall be circulated to 11 laboratories in Europe for calibration. The calibration of the volumetric instruments will consist of the determination of the amount of water the volumetric instruments deliver at a reference temperature of 20º C, using the...

Reg. No.
1533
Collaboration Type
Comparison
Status
in progress
Coordinating Institute
DMDM
Coordinator
Micic, Ljiljana
Learn more